> ## Documentation Index
> Fetch the complete documentation index at: /go/llms.txt
> Use this file to discover all available pages before exploring further.

# Migrate your USDC.n to USDC.inj

> Migrate USDC.n to USDC.inj manually with Skip:Go, before the one-step migration.

Use this guide to migrate **USDC.n to USDC.inj** with [Skip:Go](https://go.skip.build/).

## Why this migration is needed

![USDC.n is being deprecated in favor of USDC.inj](https://mintcdn.com/skip-go/CMWUnfuZBGJCt5HH/images/usdc-migration-001.png?fit=max\&auto=format\&n=CMWUnfuZBGJCt5HH\&q=85\&s=17fdf12c24000f46404aaf2373fbe9aa)

**USDC.n is being deprecated** and will no longer be the supported on the chains covered by this guide. If you hold USDC.n on those mentioned chains, you should migrate it to **USDC.inj**, the version that will be supported going forward.

### What are the differences between USDC.n and USDC.inj?

Both are USDC, but they originate from different chains and are treated as separate assets on Cosmos chains.

* **USDC.n:** USDC originating from Noble
* **USDC.inj:** USDC originating from Injective

***

## What happens when you migrate

After the migration, you will have **USDC.inj on the same chain where you started**.

For example:

`dYdX USDC.n → dYdX USDC.inj`

If you start with USDC.n on dYdX, you finish with USDC.inj on dYdX.

Skip:Go handles the intermediate steps automatically. You only need to sign **twice** during the migration.

***

## Who this guide applies to

This guide applies to USDC.n held on:

* dYdX
* Cosmos Hub
* Osmosis
* Terra 2.0
* Neutron
* ZIGChain
* Initia
* Xpla

> [!WARNING]
>
> **dYdX users**
>
> This guide applies only to USDC.n held in your **dYdX Chain wallet**.
>
> It does not apply to USDC in a **dydx.trade trading subaccount**.

***

## What to do

This **migration flow** enables you migrate USDC.n to USDC.inj on the same chain in one guided flow.

| Migration Details | |
| - | - |
| **From** | Source chain / USDC.n |
| **To** | Same chain / USDC.inj |
| **Wallet signatures** | 2 |
| **Gas you prepare** | Source chain only |

Skip:Go handles the rest automatically.

***

## Before you start

Make sure you have:

* Access to the wallet holding your **USDC.n**
* Enough gas on the chain where your USDC.n is currently held to cover the first transaction

You only need to prepare gas on your **source chain**.

You do **not** need to prepare INJ in advance. If your INJ balance is insufficient to cover the second transaction, Skip:Go will automatically recharge the required amount of INJ for you.

### Stay safe

Use only the official Skip:Go site at **go.skip.build**. Never share your seed or recovery phrase.

***

## Migrate USDC.n to USDC.inj

![Overview of the Migration Flow for migrating USDC.n to USDC.inj](https://mintcdn.com/skip-go/CMWUnfuZBGJCt5HH/images/usdc-migration-002.png?fit=max\&auto=format\&n=CMWUnfuZBGJCt5HH\&q=85\&s=7fa6bef95ec6b794d5dbbc759c4a3e4e)

![Skip:Go processing the migration while waiting for the second signature](https://mintcdn.com/skip-go/CMWUnfuZBGJCt5HH/images/usdc-migration-003.png?fit=max\&auto=format\&n=CMWUnfuZBGJCt5HH\&q=85\&s=55cd180ceb295464e1e1a7762deb7471)

**1. Select the USDC.n you would like to migrate**

Open [Skip:Go](https://go.skip.build/) and connect the wallet holding your USDC.n.

Select:

* **From:** The chain where your USDC.n is held / **USDC.n**
* **To:** The **same chain** / **USDC.inj**

For example:

**From:** `dYdX / USDC.n`

**To:** `dYdX / USDC.inj`

Enter the amount you want to migrate.

> [!WARNING]
>
> Make sure the **From and To chains are the same** and the destination asset is **USDC.inj**.

**2. Sign the first transaction**

Review the migration details and approve the first transaction in your wallet.

**Signature 1 of 2**

Gas for this transaction is paid on your source chain.

**3. Wait while Skip:Go processes the migration**

Skip:Go processes the migration automatically after your first signature.

The second signature is typically requested within about **3–5 minutes**.

No action is needed until Skip:Go prompts you to sign again.

**4. Sign the second transaction**

When prompted, approve the second transaction in your wallet.

**Signature 2 of 2**

You do **not** need to prepare INJ in advance. If your INJ balance is insufficient to cover the second transaction, Skip:Go will automatically recharge the required amount of INJ for you.

**5. Confirm the migration**

Once Skip:Go shows the migration as complete, confirm that you received **USDC.inj on the same chain where you started**.

For example:

`dYdX USDC.n → dYdX USDC.inj`

**Migration complete.**

***

## FAQ

> [accordion] I use dydx.trade. Should I use this migration?
>
> Only if you also hold **USDC.n directly in your dYdX Chain wallet**.
>
> Do not use this guide for USDC in a **dydx.trade trading subaccount**. Follow the official dYdX migration instructions for that balance when they become available.

> [accordion] Why do I need to sign twice if Skip:Go handles the migration automatically?
>
> **Signature 1** starts the migration from your source chain.
>
> Skip:Go then handles the intermediate steps automatically until **USDC.inj arrives on Injective**.
>
> **Signature 2** authorizes the final IBC transfer from Injective back to your **original source chain**.

> [accordion] I completed Signature 1, but Signature 2 hasn't appeared yet. Is something wrong?
>
> After Signature 1, Skip:Go completes the intermediate migration steps before requesting Signature 2.
>
> This usually takes about **3–5 minutes**, but timing may vary depending on network conditions. Wait until Skip:Go prompts you to sign again.

> [accordion] I completed Signature 1 but not Signature 2. Where are my funds?
>
> Once the automated steps after Signature 1 are complete, your **USDC.inj is on Injective**.
>
> If you do not complete Signature 2, your USDC.inj remains on Injective instead of being transferred back to your **original source chain**. **Your funds are not lost.**
>
> To move the funds, transfer your USDC.inj from Injective to the supported chain where you want to receive it.

> [accordion] Signature 2 asks me to sign on Injective, but I don't have any INJ. Can I continue?
>
> Yes.
>
> You do **not** need to prepare INJ in advance. If your INJ balance is insufficient, Skip:Go provides the INJ needed for Signature 2.
>
> The only gas token you need to prepare is your **source chain's gas token for Signature 1**.

> [accordion] I selected the same chain for From and To. Why do I see Avalanche or another EVM network in the route?
>
> This is expected.
>
> On the CCTP route, Skip:Go uses an EVM network as an **intermediate step in the background**.
>
> You do not need to select, fund, or interact with that network, and you do not need to prepare its gas token. Your migration still ends with **USDC.inj on your original source chain**.

> [accordion] Is USDC.n → USDC.inj a swap?
>
> Not necessarily. Skip:Go automatically determines the **best route** based on the transfer amount and the source and destination chains.
>
> When the source and destination chains are the **same**, amounts **above 250 USDC.n** use **CCTP as part of the migration route**.
>
> For other cases — including amounts of **250 USDC.n or less**, or transfers between **different source and destination chains** — Skip:Go automatically selects the best available route for the transfer.
>
> Regardless of the route used, you will receive **USDC.inj** on the destination chain. **No additional conversion or migration is required** on your end.

> [accordion] My USDC.n is on a chain that isn't supported by this migration. What should I do?
>
> If your USDC.n is on a chain not listed above, check whether **Skip:Go provides a route to transfer your USDC.n to one of the supported chains listed above**. If a route is available, transfer your USDC.n to that supported chain first, then follow this migration guide.
>
> If no supported route is available, contact the team responsible for your chain.
>
> **For chain teams:** A direct IBC path with Injective is required to support your chain as a USDC.inj destination, including **IBC light clients, an ICS-20 transfer channel, and at least one reliable relayer**.
>
> If you need help meeting these requirements and already have a Skip contact, work with them for guidance and assistance.
>
> Once the IBC connection and relaying are operational, use your existing contact with Skip or submit a **Chain Integration Request** to request support for your chain as a USDC.inj destination on Skip:Go.

## Official references

* [Circle: Now Available: USDC and CCTP on Injective](https://www.circle.com/blog/now-available-native-usdc-cctp-on-injective) — Circle's announcement of USDC and CCTP support on Injective.
* [Injective: Injective USDC will be Adopted by Cosmos and dYdX as the Canonical Stablecoin Standard](https://injective.com/blog/inj-usdc-coming-soon-cosmos-dydx) — Background on the transition to Injective-origin USDC and Skip:Go's adoption of Injective USDC.
* [Noble: A New Noble World](https://noble.xyz/blog/a-new-noble-world) — Noble's long-term plan for its existing Cosmos SDK chain.
* [Skip:Go: Supported Ecosystems and Bridges](https://docs.skip.build/go/general/supported-ecosystems-and-bridges) — Supported ecosystems and cross-chain routing information.
* [dYdX: Accounts and Subaccounts](https://docs.dydx.xyz/concepts/trading/accounts) — How dYdX separates on-chain accounts from subaccounts used for trading.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.